Table of Contents
Advertisement
4.9.3. System Reboot
On the Switch Tools Configuration Menu, pressing "R" opens the System Reboot
Menu as shown in Fig. 4-9-5. On this screen, you can reboot this Switching Hub.
PN27089K/PN27089KA Local Management System
Switch Tools Configuration -> System Reboot Menu
Reboot Status:
Reboot Type:
Reboot Timer:
Time Left:
-------------------------------- <COMMAND> -----------------------------------
Set Reboot [O]ption
Start [R]eboot Process
Set Reboot [T]imer
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Screen Description
Reboot Status:
Displays whether or not the reboot command is executed.
Stop
Reboot Type:
Displays the reboot type. The factory default setting is "Normal."
Normal
Factory Default
Factory Default
Except IP
Reboot Timer:
Displays the time between execution of the reboot command and
actual reboot. The factory default setting is 0 seconds.
Time Left:
Displays the time left before the system actually reboots after execution
of the reboot command. A key entry refreshes the screen display,
allowing you to check the elapsed time.
Stop
Normal
0 seconds
N/A
Fig. 4-9-5 System Reboot
Displays that the reboot command is not executed.
Normal reboot is executed.
All settings are reset to factory default.
All settings except the IP address are reset to
factory default.
170
Advertisement
Table of Contents
