Screen Description
Console UI Idle
Displays the idle timeout settings (in minutes) for terminating a
Timeout:
console-connected session if no input is made. The factory default setting is
5 minutes.
Telnet UI Idle
Displays the idle timeout settings (in minutes) for terminating a
Timeout:
Telnet-connected session if no input is made. The factory default setting is 5
minutes.
Telnet Server:
Displays the Telnet access settings. 'Enabled' is the factory default setting.
Enabled:
Disabled:
SNMP Agent:
Displays the SNMP access settings. 'Disabled' is the factory default setting.
Enabled:
Disabled:
IP Setup
Displays the access settings for the IP address configuration software,
Interface:
bundled with the Panasonic network cameras. 'Enabled' is the factory default
setting. * For instructions, refer to Appendix C.
Enabled:
Disabled:
Local User
Displays the current login username. 'manager' is the factory default setting.
Name:
Syslog
Displays the settings for sending system logs to the Syslog server. 'Disabled'
Transmission:
is the factory default setting.
Enabled:
Disabled:
Login Method:
Displays how to check the username and password for login.
The factory default setting is 'Local' for 1 and 'None' for 2.
Local
RADIUS
None
Access is enabled.
Access is disabled.
Access is enabled.
Access is disabled.
Access is enabled.
Access is disabled.
Sends system logs to the Syslog server.
Does not send system logs to the Syslog server.
Login with the username and password set for this Switching
Hub.
Login with authentication from the RADIUS server.
Not used. (Only Login Method2 can be configured.)
59