Table of Contents
Advertisement
Note:
In this Switching Hub, it is possible to set members of up to 10 ports to
one group, but it is up to 8 ports that execute trunking operation.
Members after the 9th port in that group get into backup mode. When
a failure occurred in link of 1-8 ports, one of them becomes a member
that constructs trunk on behalf of that port. In this case, priority order to
become a member is determined by Port Priority that is set in next
section (4.7.2.c), and, when Priority value is the same to all, trunk is
constructed by a member starting from the smallest port number in
order.
101
Advertisement
Table of Contents
