Panasonic Switch-M8ePWR PN27089KA Operation Manual page 122

Available commands are listed below.
S Select the scheduling method of QoS function.
Press "S" to change the command prompt to "Select scheduling method (S/W)>." if
Strict Priority Queuing is used, press "S."
If Weighted Round Robin is used, press "W."
M Set weight to priority (Traffic Class).
Press "M" to change the command prompt to "Enter traffic class>." Enter Traffic Class (0
to 3). Then, the command prompt changes to "Enter weight for traffic class #>." Enter
weight (1 to 127).
Q Return to the previous menu.
122