Panasonic Switch-M8ePWR PN27089KA Operation Manual page 52

Screen Description
Port Displays the port number.
Trunk Displays the group number for a trunked port.
Type Displays the port type.
100TX
1000T
1000X
Admin Displays the current port status. For all ports, 'Enabled' is the factory default
setting.
Enabled
Disabled
Link Displays the current link status.
Up
Down
Mode Displays the communication speed and full-duplex/half-duplex settings.
For all ports, 'Auto' is the factory default setting.
Auto
100-FDx(100F)
100-HDx(100H)
10-FDx(10F)
10-HDx(10H)
Flow Ctrl Displays the flow control settings.
For all ports, 'Disabled' is the factory default setting.
Enabled
Disabled
Auto-MDI Displays the Auto-MDI function settings. Ports 1-8 are set to "Disabled" and Ports
9-10 are set to "Enabled" at factory default setting.
Enabled
Disabled
The port type is 10/100BASE-TX.
The port type is 10/100/1000BASE-T.
The port type is 1000BASE-X (SFP port).
The port is available.
The port is not available.
A link has been established successfully.
A link has not been established.
Auto negotiation mode
100 Mbps full-duplex
100 Mbps half-duplex
10 Mbps full-duplex
10 Mbps half-duplex
The flow control is enabled.
The flow control is disabled.
The Auto-MDI function is enabled.
The Auto-MDI function is disabled.
52