Table of Contents
Advertisement
Available commands are listed below.
G
Create a SSH server key.
Press "G" to create the SSH server key.
H
Configure the SSH access settings.
Press "H." The command prompt changes to "Enable or Disable SSH server(E/D)>."
Enter "E" to enable the access. Enter "D" to disable the access.
O
Configure the idle timeout settings for automatically terminating a SSH-connected session
if no input is made.
Press "O." The command prompt changes to "Enter SSH UI idle timeout>." Enter a value
from 1 to 60 (minutes).
A
Configure the time to wait for a response to SSH authentication
Press "A." The command prompt changes to "Enter SSH authentication idle timeout>."
Enter a value from 1 to 120 (seconds).
R
Configure the number of times of SSH authentication.
Press "R." The command prompt changes to "Enter SSH authentication retries time>."
Enter a value from 0 to 5 (times).
Q
Return to the previous menu.
69
Advertisement
Table of Contents
