Panasonic Switch-M8ePWR PN27089KA Operation Manual page 124

Available commands are listed below.
S Switch enabled/disabled of the DiffServ function.
Press "S." The command prompt changes to "Enable or Disable Diffserv (E/D)>." Press
"E" to enable the function. Press "D" to disable it.
M Assign priority (Priority) to DSCP values.
Press "M" to change the command prompt to "Enter DSCP>." Enter a priority value (0 to
63) to be assigned. Then, the command prompt changes to "Enter priority for DSCP #
(0-3)>." Enter weight (0 to 3).
Q Return to the previous menu.
124