Enable/Disable Individual Trap Menu - Panasonic Switch-M8ePWR PN27089KA Operation Manual

4.6.3.c. Enable/Disable Individual Trap Menu
On the SNMP Trap Receiver Configuration Menu screen, pressing "d" opens the
Enable/Disable Individual Trap Menu screen, as shown in Fig. 4-6-7. On this
screen, you can set the trap sending settings.
PN27089K/PN27089KA Local Management System
SNMP Trap Receiver Configuration -> Enable/Disable Individual Trap Menu
SNMP Authentication Failure :
Enable Link Up/Down Port:
PoE Trap Control:
Temperature Trap Control:
Temperature Threshold:
FAN Failure:
-------------------------------- <COMMAND> -----------------------------------
Enable/Disable [A]uth Fail Trap
Add Link Up/Down Trap [P]orts
[D]elete Link Up/Down Trap Ports
Enable/Disable Po[E] Trap
Enable/Disable [T]emperature Trap
[S]et Temperature Threshold
Enable/Disable [F]AN Fail Trap
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Disabled
1-10
Enabled
Disabled
66 degree(s) Celsius
Enabled
Fig. 4-6-7 Enable/Disable Individual Trap
48