Vlan Port Config - Panasonic PN25249 Operation Manual

3.2.3.

VLAN Port Config

Select "Advanced Config" and "VLAN" and then "VLAN Port Config" to open the
screen shown in Figure 3-18. On this screen, you can configure the specified VLAN
port settings.
Screen Description
Port Number Displays the port number.
PVID Displays the port's current PVID (Port VLAN ID). PVID represents a VLAN ID to
which an untagged packet should be sent when it is received. The factory default
setting is 1. If a tagged packet is received, the tag is referenced regardless of this
value to determine the destination port.
Receiving Frame Displays the type of frames to be received. For all ports, "Admit All" is the factory
Type default setting.
Admit All
Tagged Only
Figure 3-18 VLAN Port Config
All frames are received.
Only tagged frames are received.
35