4.7.10. Ring Redundant Protocol Configuration
On the Advanced Switch Configuration Menu screen, pressing "R" opens the
Ring Redundant Protocol Configuration screen as shown in Fig. 4-7-31. On this
screen, you can configure the Ring Redundant Protocol (RRP).
PN27089K/PN27089KA Local Management System
Advanced Switch Configuration -> Ring Redundant Protocol Configuration
RRP Status : Disabled
Domain Name
------------------------- ----------- ------------ ----------- ---------
-------------------------------- <COMMAND> -----------------------------------
Set RRP [S]tatus
[C]reate RRP Domain
S[h]ow RRP Domain information
Command>
Enter the character in square brackets to select option
Fig. 4-7-31 Ring Redundant Protocol Configuration Menu
Total Domain Number : 0
Ctrl VLAN Data VLAN(s) Ring Status Node Type
[M]odify RRP Domain
[D]elete RRP Domain
[Q]uit to previous menu
143