Table of Contents
Advertisement
4.6.7.b. RADIUS Configuration
On the System Security Configuration Menu, pressing "R" opens the RADIUS
Configuration Page screen, as shown in Fig. 4-6-13. In this screen, you can
configure accessing to RADIUS server that is used in IEEE802.1X authentication.
PN27089K/PN27089KA Local Management System
System Security Configuration -> RADIUS Configuration Menu
NAS ID: Nas1
Index Server IP Address
----- ----------------- -------------------- ------------- ------------------
1
0.0.0.0
2
0.0.0.0
3
0.0.0.0
4
0.0.0.0
5
0.0.0.0
-------------------------------- <COMMAND> -----------------------------------
Set [N]AS ID
Set Server [I]P
Set Shared Se[c]ret
Set [R]esponse Time
Set [M]ax Retransmission
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Screen Description
NAS ID：
Indicates an authentication ID (NAS Identifier).
Server IP
Indicates an IP address of RADIUS server. The factory default setting is
Address
0.0.0.0.
Shared Secret
Indicates a common key (Shared Secret) that is used in authentication. The
same key must be set between the server and the RADIUS client. In general,
system manager set this secret key.
The factory default setting is no secret key.
Response Time
Indicates maximum response time for authentication request to RADIUS
server.
The factory default setting is 10 seconds.
Maximum
Indicates the number of retransmission times for authentication request to
Retransmission
RADIUS server.
The factory default setting is 3.
Shared Secret
Fig. 4-6-13 RADIUS Configuration
64
Response Time Max Retransmission
10 seconds
3
10 seconds
3
10 seconds
3
10 seconds
3
10 seconds
3
Advertisement
Table of Contents
