4.7.8.a. Set Leave Mode Menu
On the IGMP Snooping Configuration Menu, pressing "L" opens the Set Leave
Mode Menu as shown in Fig. 4-7-25. On this screen, you can set the operation
when receiving a Leave packet.
PN27089K/PN27089KA Local Management System
IGMP Snooping Configuration -> Set Leave Mode Menu
Leave Delay Time : 5 sec
Port
Mode
------ ------------
1
Normal
2
Normal
3
Normal
4
Normal
5
Normal
6
Normal
7
Normal
8
Normal
9
Normal
10
Normal
-------------------------------- <COMMAND> -----------------------------------
Set Leave Delay [T]ime
Command>
Enter the character in square brackets to select option
Screen Description
Leave Delay Time:
Port
Mode
[S]et Leave Mode
Fig. 4-7-25 Set Leave Mode Menu
Displays the waiting time after receiving a Leave packet.
The factory default setting is 5 seconds.
Displays the port number.
Displays the operation after receiving a Leave packet.
Normal
Waits for the specified Leave Delay Time after
receiving a Leave packet and then sends it to the
router port. (Factory default setting)
Immediate
Sends a Leave packet to the router port immediately
after receiving it.
133
[Q]uit to previous menu