Table of Contents
Advertisement
Screen Description
RRP Domain
Displays the domain name.
Name:
RRP Node
Displays the node role.
Type:
Master
Transit
Primary Port:
Displays the primary port.
Secondary Port:
Displays the secondary port.
Polling Interval:
Displays the polling interval.
Fail Period:
Displays the timeout for polling.
Control VLAN:
Displays the control VLAN ID.
Data VLAN:
Displays the data VLAN ID.
Available commands are listed below.
N
Set the domain name.
Press "N." The command prompt changes to "Enter RRP Domain Name>." Enter a name of
the domain to be configured in 25 characters or less.
T
Set the node role.
Press "N." The command prompt changes to "Enter RRP Node Type (M/T) >." Press "M" to
set the domain for a master node. Press "T" to set the domain for a transit node.
P
Set the primary port.
Press "P." The command prompt changes to "Enter RRP Primary Port >." Enter the port
number (1-10) to set as a primary port.
S
Set the secondary port.
Press "S." The command prompt changes to "Enter RRP Secondary Port >." Enter the port
number (1-10) to set as a secondary port.
O
Set the polling interval.
Press "O." The command prompt changes to "Enter RRP Polling Interval>." Enter a value
between 1 and 2 (seconds) as the polling interval.
F
Set the timeout for polling.
Press "F." The command prompt changes to "Enter RRP Fail Period>." Enter a value
between 2 and 5 (seconds) as the timeout for polling.
S
Set the control VLAN ID.
Press "S." The command prompt changes to "Enter Control VLAN ID >." Enter the VLAN ID
(2-4094) to set as a control VLAN. When entering two or more port numbers, separate
them with a comma without a space, or use a hyphen for consecutive numbers.
D
Set the data VLAN ID.
Press "D." The command prompt changes to "Enter Data VLAN ID >." Enter the VLAN ID
(1-4094) to set as a data VLAN. When entering two or more VLAN IDs, separate them
with a comma without a space, or use a hyphen for consecutive numbers.
A
Set a domain.
Press "A" to apply your settings.
Q
Return to the previous menu.
Displays that the Switching Hub is Master node, controller of
the ring topology.
Each domain must have only one Master node.
Displays that the Switching Hub is Transit node.
150
Advertisement
Table of Contents
