LED
Temperature LED
(TEMP)
Fan LED
(FAN)
Status/ECO mode
LED
(STATUS/ECO)
Power supply
mode LED (PoE)
GIGA mode LED
(GIGA)
Speed mode LED
(100M)
Duplex mode LED
(FULL)
Loop History mode
LED
(LOOP HISTORY)
Port LED display mode
In the Status mode described later, the port LED indicates link-up and
communication status. Pressing "LED DISPLAY CHANGE BUTTON" on the front
panel allows to change the port LED display mode as follows:
Port LED display mode
STATUS/ECO
PoE
GIGA
100M
FULL
LOOP HISTORY
Behavior
Green Light
Within the threshold setting of the internal
temperature sensor.
Orange Blink
Exceeding the threshold setting of the internal
temperature sensor.
(For details, refer to 4.6.3.c.)
Green Light
The fan is operating normally.
Orange Blink
Fan error.
Green Light
Operating in the Status mode.
Green Blink
Operating in the ECO mode.
All port LEDs (Left) are turned off.
Orange Light
Booting.
Orange Blink
Malfunction. (Contact the seller.)
Off
Power off
Green Light
Operating in the Power supply mode.
Green Light
Operating in the GIGA mode.
Green Light
Operating in the Speed mode.
Green Light
Operating in the Duplex mode.
Green Light
Operating in the Loop History mode.
Green Blink
Loop is occurring, or occurred within the last 3
days.
Displays link-up and communication status.
Displays power supply status to the connected devices.
Displays link-up status in 1000 Mbps.
Displays link-up status in 100 Mbps.
Displays link-up status in full-duplex and half-duplex.
Displays the loop detection history and port blocking status.
18
Description
Description