Table of Contents
Advertisement
Available commands are listed below.
N
Set the NAS ID (NAS Identifier).
Press "I." The command prompt changes to "Enter NAS ID>." Enter NAS ID in 16
characters or less.
I
Set an IP address of RADIUS server.
Press "A." The command prompt changes to "Enter IP Address for RADIUS server>."
Enter an IP address.
C
Set a secret key of RADIUS server.
Press "C." The command prompt changes to "Enter secret string for server>." Enter the
secret string in 20 characters or less.
R
Set a response time until the RADIUS server responds to authentication request.
Press "R." The command prompt changes to "Enter response time>." Enter the response
time with a value of 1 to 120 sec.
M Set maximum number of times of retransmission of authentication request.
Press "M." The command prompt changes to "Enter maximum retransmission>." Enter an
integer number of 1 to 254.
Q
Return to the previous menu.
65
Advertisement
Table of Contents
