Panasonic Switch-M8ePWR PN27089KA Operation Manual page 3

 Do not install this Switching Hub at the location with continuous vibration or
strong shock, or at the unstable location
Deviation could lead to injury and/or equipment failure.
 Do not install any module other than our optional SFP module to SFP
extension slot.
Deviation could lead to fire, electric shock, and/or equipment failure.
 Do not connect any cable other than our optional console cable.
Deviation could lead to fire, electric shock, and/or equipment failure.
 Do not put this Switching Hub into fire.
Deviation could lead to explosion and/or fire.
 Do not use the supplied power cord for anything other than this product.
Deviation could lead to fire, electric shock, and/or equipment failure.
 Use the bundled power cord (AC 100 – 240V specifications).
Deviation could lead to electric shock, malfunction, and/or equipment
failure.
The warranty does not cover any problems resulting from the use of any
power cord other than the one supplied.
 Unplug the power cord in case of equipment failure.
Deviation such as keeping connected for a long time, could lead to fire.
 Connect this Switching Hub to ground.
Deviation could lead to electric shock, malfunction, and/or equipment
failure.
 Connect the power cord firmly to the power port.
Deviation could lead to electric fire, shock, and/or malfunction.
 Unplug the power cord if the Status/ECO LED (Status/ECO mode), TEMP LED
(temperature sensor), or FAN LED (fan sensor) blinks in orange (system fault).
Deviation, such as keeping connected for a long time, could lead to fire.
 When this Switching Hub is installed on wall surface, mount it firmly so as not
to drop dwon because of weight of the main body and connection cable.
Deviation could lead to injury and/or equipment failure.
 Up to two Switching Hubs can be connected by using the connection brackets
and connection bracket screws included with the optional PN71052 19-inch
rack mount brackets (for two units). Attach the connection brackets to the
connection bracket screw holes on the front and back panels to securely fix
the Switching Hubs before installation.
If the Switching Hubs are not fixed securely, they may fall, leading to injury
and/or equipment failure.
WARNING
WARNING
3