Table of Contents
Advertisement
Available commands are listed below.
N
Show the values of the next port.
Press "N." The screen displays the counter values of the next port. The command is
invalid for Port 10.
P
Show the values of the previous port.
Press "P." The screen displays the counter values of the previous port. The
command is invalid for Port 1.
S
Switch a port to be displayed.
Press "S." The command prompt changes to "Select Port number>." Enter the port
number you to display the statistics.
F
Set the display refresh mode.
Press "F." The command prompt changes to "1 for start to refresh,2 for set refresh
rate." Press "1" to cancel the automatic refresh. Press "2" to change the refresh
interval.
If you press "2", the command prompt changes to "Input refresh time>." Enter an
integer between 5 and 600 (seconds).
R
Reset counter values.
Press "R." The counter values are reset and immediately changed with those
accumulated after resetting the counters.
Q
Return to the previous menu.
160
Advertisement
Table of Contents
