Table of Contents
Advertisement
4.7.8.b. VLAN Filter Configuration
On the IGMP Snooping Configuration Menu, pressing "V" opens the Show IGMP
Snooping VLAN Filter Table Menu as shown in Fig. 4-7-26. On this screen, you
can configure VLANs to be filtered out from the target of IGMP Snooping.
PN27089K/PN27089KA Local Management System
IGMP Snooping Configuration -> Show IGMP Snooping VLAN Filter Table Menu
VLAN ID
Status
------- ------------
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
Command>
Enter the character in square brackets to select option
Screen Description
VLAN ID
Status
Available commands are listed below.
N
Show the next page.
Press "N." The screen displays the next page.
P
Show the previous page.
Press "P." The screen displays the previous page.
S
Set a VLAN to be filtered out of the target of IGMP snooping.
Press "S." The command prompt changes to "Enter VLAN ID >." Set the VLAN ID
with a value between 1 and 4094.
Q
Return to the previous menu.
Fig. 4-7-26 VLAN Filter Configuration
Displays VLAN ID.
Displays the filter status.
Filtered
VLAN that is filtered out of the target of IGMP
snooping.
135
[S]et VLAN Filter
[Q]uit to previous menu
Advertisement
Table of Contents
