Trunk Configuration Menu - Panasonic Switch-M8ePWR PN27089KA Operation Manual

4.7.2.b. Trunk Configuration Menu
On the Advanced Switch Configuration Menu, pressing "L" opens the Trunk
Configuration Menu screen, as shown in Fig. 4-7-8. In this screen, you can
configure trunking.
PN27089K/PN27089KA Local Management System
Advanced Switch Configuration -> Trunk Configuration Menu
System Priority : 1
Key Mode
----- -------- ---------------------------------------------------------------
-------------------------------- <COMMAND> -----------------------------------
Se[t] System Priority
[A]dd Group Member
[R]emove Group Member
[M]odify Group Mode
Command>
Enter the character in square brackets to select option
Screen Description
System System priority is an order of priority in this Switching Hub required for
Priority: constructing trunking on the network using LACP. Smaller number has higher
priority. The factory default setting is 1.
Key Indicates the group number of trunking.
Mode Indicates the operation mode of trunking.
Active
Passive
Manual
Members Indicates the port belonging to trunking group.
Port List
Member Port List
Set P[o]rt Priority
LACP [G]roup Status
[Q]uit to previous menu
Fig. 4-7-8 Trunk Configuration
Sends out LACP packet from this Switching Hub and constructs a
trunk by negotiating with other side.
It is required that the other side mode is Active or Passive.
Does not send out LACP packet from this Switching Hub and
constructs a trunk by negotiating with other side using LACP packet
received from other side.
It is required that the other side mode is Active.
Constructs trunking forcibly without using LACP packet. It is
required that the other side is the same configuration as this side.
99