Table of Contents
Advertisement
Available commands are listed below.
N
Set a name of VLAN.
Press "N." The command prompt changes to "Set VLAN name->Enter VLAN name>." Enter
new VLAN name in 30 characters or less.
P
Set the member(s) port of VLAN.
Press "P." The command prompt changes to "Enter egress port number>." Enter a port
number to set. When entering multiple port numbers, delimit with comma with no
space, or hyphenate the continuous numbers.
A
Apply to modify the VLAN settings.
By pressing "A", apply the modifiled settings.
Q
Return to the previous menu.
95
Advertisement
Table of Contents
