Table of Contents
Advertisement
4.6.8.e. Displaying MAC address table by VLAN
On the Forwarding Database Information Menu, press "V." The command
prompt changes to "Enter VLAN ID>." Specifying a port number opens the
Display MAC Address by VLAN ID screen as shown in Fig. 4-6-22. In this screen,
you can display MAC Address table by VLAN.
PN27089K/PN27089KA Local Management System
Forwarding Database Menu -> Display MAC Address by VLAN ID
Age-Out Time: 300 Sec.
MAC Address
-----------------
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
Set [A]ge-Out Time
Command>
Enter the character in square brackets to select option
Fig. 4-6-22 Displaying MAC address table by VLAN
Screen Description
Age-Out Time:
Displays a time to store MAC address table. It is equal to the time after
receiving the last packet. The factory default setting is 300 seconds (5
minutes).
Select VLAN ID
Displays the selected VLAN ID.
MAC Address
Displays all the entries in the MAC address table.
Port
Displays a port to which the MAC address has assigned.
Available commands are listed below.
N
Display the next page.
Press "N" to display the next port.
P
Display the previous page.
Press "P" to display the previous port.
A
Set a time to store MAC address.
Selected VLAN ID:1
Port
----
[S]elect VLAN ID
[Q]uit to previous menu
79
Advertisement
Table of Contents
