Panasonic Switch-M8ePWR PN27089KA Operation Manual page 163

Table of Contents

Advertisement

The counters are described below.
Total RX Bytes
Displays the number of bytes of all packets received.
Total RX Pkts
Displays the number of all packets received.
Good Broadcast
Displays the number of broadcast packets received.
Good Multicast
Displays the number of multicast packets received.
CRC/Align
Displays the number of error packets that have a normal packet length
Errors
(64 to 1518 bytes); however, have an error found by an error detection
code (FCS). If the packet length is an integral multiple of one byte, the
error is a CRC (FCS) error. If not, it is an Align error.
Undersize Pkts
Displays the number of error packets that have a packet length less than
64 bytes; however, have no other errors.
Oversize Pkts
Displays the number of packets having a packet length greater than
1518 bytes.
Fragments
Displays the number of error packets that have a packet length less than
64 bytes and have a CRC or alignment error.
Jabbers
Displays the number of error packets that have a packet length less than
1518 bytes and have a CRC or alignment error.
Collisions
Displays the number of packet collisions.
64-Byte Pkts
Displays the total number of packets having a packet length of 64 bytes.
65-127 Pkts
Displays the total number of packets having a packet length of 65 to
127 bytes.
128-255 Pkts
Displays the total number of packets having a packet length of 128 to
255 bytes.
256-511 Pkts
Displays the total number of packets having a packet length of 256 to
511 bytes.
512-1023 Pkts
Displays the total number of packets having a packet length of 512 to
1023 bytes.
Over 1024 Pkts
Displays the total number of packets having a packet length of 1024
bytes or greater.
Note:
By factory default, this screen is set to refresh about every 300 seconds.
Therefore, both the console and Telnet timeouts do not occur.
163

Advertisement

Table of Contents
loading

This manual is also suitable for:

Switch-m8espwr pn27089na

Table of Contents