4.7.9.b. PoE Global Configuration Menu
On the Power Over Ethernet Configuration Menu, pressing "G" opens the PoE
Global Configuration Menu as shown in Fig. 4-7-30. On this screen, you can
configure PoE settings.
PN27089K/PN27089KA Local Management System
Power Over Ethernet Configuration -> PoE Global Configuration Menu
Fan Speed :
Power Budget :
Power Consumption :
Power Usage Threshold For Sending Trap: 50 %
-------------------------------- <COMMAND> -----------------------------------
Set [F]an Speed
Set Power [U]sage
[Q]uit to previous menu
Note:
The Power Budget value will change automatically if select the Fan Speed.
Command>
Enter the character in square brackets to select option
Screen Description
Fan Speed:
Displays the fan speed.
Changing this value also changes Power Budget that is described below
'High' is the factory default setting.
Low
Mid
High
Power Budget:
Displays the maximum amount of power this Switching Hub can supply.
Power
Displays the amount of power supplied by this Switching Hub.
Consumption:
Power Usage
Displays the power supply threshold for sending a trap.
Threshold For
The factory default setting is 50%.
Sending Trap:
High
124W
0W
Fig. 4-7-30 PoE configuration
Sets the fan speed to Low and Power Budget to 60 W.
(For 40 degrees C support)
Sets the fan speed to Middle and Power Budget to 60 W.
(For 50 degrees C support)
Sets the fan speed to High and Power Budget to 124 W.
(For 40 degrees C support)
141