Table of Contents
Advertisement
Available commands are listed below.
N
Show the next page.
Press "N" to display the next page.
P
Show the previous page.
Press "P" to display the previous page.
G
Change the IGMP Snooping function status.
Press "G." The command prompt changes to "Enable or Disable IGMP snooping
(E/D)>." Press "E" to enable the function. Press "D" to disable it.
U
Change the Multicast filtering function status.
Press "U." The command prompt changes to "Enable or Disable Multicast Filtering
(E/D)>." Press "E" to enable the function. Press "D" to disable it.
H
Set the aging time of multicast group members.
Press "S." The command prompt changes to "Enter age out time>." Set the time
between 150 and 300 seconds.
R
Set the aging time of the multicast group's router port.
Press "S." The command prompt changes to "Enter age out time>." Set the time
between 150 and 300 seconds.
I
Set the Proxy Report waiting time.
Press "I." The command prompt changes to "Enter forward interval>." Set the time
between 0 and 25 seconds.
L
Move to the Leave mode configuration screen.
Press "L." The Set Leave Mode Menu opens. (Refer to 4.7.8.a.)
V
Move to the VLAN filter configuration screen.
Press "V." The Show IGMP Snooping VLAN Filter Table Menu opens.
(Refer to 4.7.8.b.)
T
Show the router port table.
Press "T." The Show Router Port Table Menu opens.
(Refer to 4.7.8.c.)
M Statically set a router port.
Press "M." The command prompt changes to "Add or Delete static group
member(A/D)>." Press "A" to add a router port. Press "D" to delete it. Then, enter
the target VLAN ID, multicast MAC address, and port number.
Q
Return to the previous menu.
Note:
The IGMP Snooping function and the Internet Mansion mode cannot be
used simultaneously.
132
Advertisement
Table of Contents
