Table of Contents
Advertisement
4.7.8. IGMP Snooping Configuration
On the Advanced Switch Configuration Menu, pressing "I" opens the IGMP
Snooping Configuration Menu as shown in Fig. 4-7-24. When you use an IP
multicast application, such as a video-conference system and video/audio
delivery system, this function prevents multicast packets from being sent to all
ports and using up the bandwidth.
In addition, the Multicast filtering function can prevent multicast packets from
being sent to any ports other than specified ones and the router port even if a
multicast group is not created.
PN27089K/PN27089KA Local Management System
Advanced Switch Configuration -> IGMP Snooping Configuration Menu
IGMP Snooping Status
Multicast Filtering Status: Disabled
Host Port Age-Out Time
Report Forward Interval
VLAN ID Group MAC Address Group Members
------- ----------------- --------------------------------------------------
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
Set I[G]MP Snooping Status Set Report [I]nterval
Set M[u]lticast Filtering Set [L]eave Mode
Command>
Enter the character in square brackets to select option
: Disabled
: 260 sec
: 5 sec
Set [H]ost Port Aged Time
Set [R]outer Port Aged Time Show Router Port [T]able
Fig.4-7-24 IGMP Snooping Configuration
130
Router Port Age-Out Time : 125 sec
Show [V]LAN Filter Table
Set Static [M]ember Port
[Q]uit to previous menu
Advertisement
Table of Contents
