Mac Address Table Display, Registration, And Configuration - Panasonic PN28160A Operation Manual

3.6. MAC Address Table Display, Registration, and
Configuration
Configure the MAC address table and register/delete static MAC addresses in "Global configuration
mode," and show the MAC address table in "Privileged mode."
Command to show the MAC address auto-learning status
M24eG#
Command to show the aging time
M24eG#
Command to show the MAC address table (dynamic entries)
M24eG#
Command to show the MAC address table (static entries)
M24eG#
Command to set the aging time
M24eG(config)#
Command to register the static MAC address entry
M24eG(config)#
Command to delete the static MAC address entry
M24eG(config)#
Command to enable MAC address auto-learning
M24eG(config-if)#
Command to disable MAC address auto-learning
M24eG(config-if)#
Command to set the limit of the number of auto-learned MAC addresses
M24eG(config-if)#
Command to delete the limit of the number of auto-learned MAC addresses
M24eG(config-if)#
show mac-learning
show mac-address-table aging-time
show mac-address-table mac
show mac-address-table static
mac-address-table aging-time <aging time>
mac-address-table static <MAC addr.> <interface name> vlan <VLAN ID>
no mac-address-table static <MAC addr.> vlan <VLAN ID>
mac-learning
no mac-learning
mac-learning limit <limit>
no mac-learning limit
99