Snmp Configuration - Panasonic PN28160A Operation Manual

3.3. SNMP Configuration

Configure the SNMP agent setting in "Global configuration mode." Confirm the configuration
information by executing the "show snmp" command in "Privileged mode."
Command to show the SNMP information
M24eG#
Command to enable the SNMP agent
M24eG(config)#
Command to disable the SNMP agent
M24eG(config)#
Command to set the SNMP management (access permission from/to SNMP manager)
M24eG(config)#
Command to delete the SNMP management (access permission from/to SNMP manager)
M24eG(config)#
Command to set the SNMP trap (type, IP address, community name)
M24eG(config)#
Command to delete the SNMP trap (type, IP address, community name)
M24eG(config)#
Command to set the SNMP trap (authentication failure)
M24eG(config)#
Command to delete the SNMP trap (authentication failure)
M24eG(config)#
Command to set the SNMP trap (notification of port link up/down status)
M24eG(config)#
Command to delete the SNMP trap (notification of port link up/down status)
M24eG(config)#
show snmp
snmp-server agent
no snmp-server agent
snmp-server community <id> <community> <ro/rw> <ip-address>
no snmp-server community <id>
snmp-server host <id> type <v1/v2> <ip-address> trap <community>
no snmp-server host <id>
snmp-server enable traps snmp authentication
no snmp-server enable traps snmp authentication
snmp-server enable traps linkupdown <1-2 or 1,2,3 or 1,2,3-5>
no snmp-server enable traps linkupdown <1-2 or 1,2,3 or 1,2,3-5>
33