Vlan Messages - Fujitsu Primergy BX900 System Message Manual
Blade server systems
ethernet connection blade module sb6 / sb11a / sb11 switch and ibp version
Hide thumbs
Also See for Primergy BX900:
- User manual (811 pages) ,
- Hardware reference manual (69 pages) ,
- Configuration manual (67 pages)
Table of Contents
Advertisement
2.21
VLAN Messages
This section contains the VLAN module messages.
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
6
dynamicToStaticVlanConvert: Failure to convert %d.
Fail to convert the dynamic VLAN to static VLAN.
The dynamic VLAN need to check the availability.
6
No available entries for vlan ID %d.
There is no VLAN available. It reaches the max. VLAN entries in
system.
The dynamic VLAN need to check the availability.
6
No available entries for vlan ID %d.
There is no VLAN available. It reaches the max. VLAN entries in
system.
The VLAN table is exceeded to the system limitation.
6
Attempt to create a vlan with an invalid vlan id %d
The range of the VLAN id is invalid.
To create a VLAN ID in the support range.
6
Unable to obtain permission from the Resource Manager to
create VLAN vlan id %d
Unable to obtain permission from external resource manager to
create resource.
The VLAN module is failed to init.
6
Creation of vlan %d failed
Fail to create a specific VLAN.
Need to check the VLAN ID is available or not.
2011 Fujitsu Technology Solutions
©
Advertisement
Table of Contents
