Service Lan - Fujitsu Primergy BX900 System Message Manual

4.3.4

Service LAN

This section contains the Service LAN module messages.
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error: Failed to set <svcLanName>. Service LAN name must
contain alphaNumeric characters only, and can't be empty.
It is failed to create a Service LAN Group while the name is not
alphanumeric characters.
Use alphanumeric characters for the Service LAN Group name
to create a Service LAN Group and the name can not be empty.
Error: Can't set the same VLAN ID on uplink set
<uplinkSetName>.
The Service LAN Group can't use this VLAN ID which is used by
on group with the same uplink set.
Use the different VLAN ID for Service LAN Group.
Error: Failed to delete <svcLanName>.
The Service LAN name is invalid.
Refresh the WEB page, and select the service LAN name again.
Error: Failed to create Service LAN. Service LAN already exists.
The Service LAN already existed.
Create the Service LAN with a name which is not used in the
system.
Error: Value <vlanId> is out of range for VLAN ID. The valid
range is 1 to 4094.
The input VLAN ID of Service LAN is out of range.
Set VLAN ID of Service LAN with numeric character 1 to 4094.
Error: Uplink set <uplinkSetName> is used by other module.
The Uplink set is already used by other module.
Remove the Uplink set from the used module or set other Uplink
for Service LAN.
Error: Interface <interface_identifier> has been used.
The interface is already used by other Group.
Remove the interface from the other Group or set other interface
to Service LAN.
2011 Fujitsu Technology Solutions
©