Fujitsu Primergy BX900 System Message Manual page 295
Blade server systems
ethernet connection blade module sb6 / sb11a / sb11 switch and ibp version
Hide thumbs
Also See for Primergy BX900:
- User manual (811 pages) ,
- Hardware reference manual (69 pages) ,
- Configuration manual (67 pages)
Table of Contents
Advertisement
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Source and Target Switch ID should not be the same.
User try to move stack management functionality to a unit, but
the source and target unit number is the same.
Use the correct source and target unit number for this function.
Incorrect input! Use 'archive copy-sw [destination-system
<unit>]'.
User input incomplete command .
Use 'archive copy-sw [destination-system <unit>]'.
Incorrect input! Use 'archive download-sw <url>'
User input incomplete command .
Use 'archive download-sw <url>'
Invalid url specified! Use xmodem or
tftp://<ipaddress>/<filepath>/<fileName>.
User input incorrect URL format.
Use the correct URL format for this function.
ERROR: Filename must be 31 alphanumeric characters or less!
User input the file name length is over 31 characters.
The file name length should less than 31 characters.
ERROR: Filepath must be 95 alphanumeric characters or less!
User input the file path length is over 95 characters.
The file path length should less than 95 characters.
Cannot Use Xmodem Transmit Function in TELNET.
User try to download software by Xmodem protocol, but the
management connection is from Telnet method not from
Console (serial) port.
User should use the Console port to manage switch, and
download software by Xmodem protocol.
2011 Fujitsu Technology Solutions
©
Advertisement
Table of Contents
