Security; Port Access Control - Fujitsu Primergy BX900 System Message Manual

4.4

Security

4.4.1

Port Access Control

This section contains Port Access Control module messages.
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error: Server Timeout (secs) format is invalid.
User uses non-numeric characters for Server Timeout.
Use numeric character to configure Server Timeout.
Error: Value (<value>) is out of range for Server Timeout (secs).
The valid range is 1 to 65535.
The value of Server Timeout is out of range.
The range for Server Timeout is 1 to 65535.
Error: Maximum Requests format is invalid.
User uses non-numeric characters for Maximum Requests.
Use numeric character to configure Maximum Requests.
Error: Value (<value>) is out of range for Maximum Requests.
The valid range is 1 to 10.
The value of Maximum Requests is out of range.
To set the value of Maximum Requests in the range of 1 to 10.
Error: Reauthentication Period (secs) format is invalid.
User uses non-numeric characters for Reauthentication Period.
To set the value of Reauthentication Period in the range of 1 to
65535.
Error while trying to initialize port
User try to Initialize the 802.1x function of a interface, but the
802.1x global Administrative Mode does not enable.
User should enable the 802.1x global Administrative Mode, and
then Initialize the 802.1x interface.
Error while trying to reauthenticate port
User try to Reauthenticate the 802.1x function of a interface, but
the 802.1x global Administrative Mode does not enable.
User should enable the 802.1x global Administrative Mode, and
then Reauthenticate the 802.1x interface.
2011 Fujitsu Technology Solutions
©