Fujitsu Primergy BX900 System Message Manual page 177
Blade server systems
ethernet connection blade module sb6 / sb11a / sb11 switch and ibp version
Hide thumbs
Also See for Primergy BX900:
- User manual (811 pages) ,
- Hardware reference manual (69 pages) ,
- Configuration manual (67 pages)
Table of Contents
Advertisement
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error! Use "lldp notification-interval <interval> " to limit how
frequently LLDP remote data change notifications are sent.
User input incomplete command .
Use "lldp notification-interval <interval> "
Error! Enter a value in the range <5 - 3600> seconds.
User input an value out of range <5-3600> seconds for lldp
notification-interval.
Enter a value in the range <5 - 3600> seconds.
Error! Use"lldp notification" to enable remote data change
notifications.
User attempt to configure lldp notification on invalid interfaces.
Make sure the interface is not port-channel interface.
Error! Use "lldp transmit-tlv [sys-desc] [sys-name] [sys-cap]
[port-desc] [org-spec]" to transmit LLDP optional TLV(s) on the
interface.
User input incomplete command .
Use "lldp transmit-tlv [sys-desc] [sys-name] [sys-cap] [port-desc]
[org-spec]" to transmit LLDP optional TLV(s) on the interface.
Error! Interface out of range.
User attempt to configure LLDP transmit-tlv on invalid interfaces.
Make sure the interface is not port-channel interface.
Error! Use "lldp timers [interval <transmit-interval>] [hold
<hold-multiplier>] [reinit <reinit-delay>]" to configure the LLDP
global timer values.
User input incomplete command .
Use "lldp timers [interval <transmit-interval>] [hold
<hold-multiplier>] [reinit <reinit-delay>]" to configure the LLDP
global timer values.
Error! Enter a value in the range <2 - 10>.
User input incomplete command or value out of range <2-10>.
Enter a value in the range <2 - 10> for lldp timers hold.
2011 Fujitsu Technology Solutions
©
Advertisement
Table of Contents
