This section contains the Configuration Out-Band Mgmt messages.
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error : Invalid IP Address !
User input an invalid or reserved IP address.
Use the valid IP address for this function. IP address should be
in a.b.c.d format where range for a, b, c, and d is 1 - 255.
Warning: Changing protocol mode will reset IP configuration.
User try to change the interface protocol mode, system will
pop-up a message to remind the current IP address will be
cleared.
No recommended action, it just a warning message.
Error: IP Address requires an IP address in x.x.x.x form with
each octet(x) in the range 0-255.
User input an invalid format IP address.
Use the valid IP address for this function. IP address should be
in a.b.c.d format where range for a, b, c, and d is 1 - 255.
Error: Subnet mask must have contiguous ones.
User input an IP subnet mask that does not have contiguous
ones in binary. For example, 255.255.255.129, the decimal 129
is 10000001 in binary, it's not a contiguous ones number.
Use the correct IP subnet mask format. The subnet mask should
have contiguous ones in binary. For example, 255.255.255.128
or 255.255.255.192 or 255.255.255.224.
Error: Subnet Mask requires a subnet mask in x.x.x.x form.
User input an invalid format IP Subnet mask.
Use the valid IP Subnet mask for this function. Subnet mask
should be in a.b.c.d format where range for a, b, c, and d is 1 -
255.
Error : Invalid Gateway IP Address !
User input an invalid or reserved IP address.
Use the valid IP address for this function. IP address should be
in a.b.c.d format where range for a, b, c, and d is 1 - 255.
2011 Fujitsu Technology Solutions
©