Port Group Messages - Fujitsu Primergy BX900 System Message Manual

Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
2.31

Port Group Messages

Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
6
Can't change DHCP client identifier while DHCP client identifier
mode is not TEXT
Can't change DHCP client identifier while DHCP client identifier
mode is not TEXT
Change the DHCP identifier to use TEXT mode.
6
Internal stacking port (S1) is disabled by E-Keying on unit:
<unit-id>
Internal stacking port (S1) is disabled by e-Keying on unit
<unit-id>
Check the setting from the management blade of BX900 if the
internal stacking is disabled. If you want to stack two connection
blade, enabling the internal stacking link is preferred.
6
Failed to set isolation mode of intIfNum <intIfNum>
Can't apply the isolation function for interface <intIfNum> while
interface is link up.
Send the log to your support agent to find the problem.
6
portGrpsIntfChangeCallback: Received an interface event
callback while not in EXECUTE state. (event: <event>, state:
<state>)
portGrps is not ready executed.
Send the log to your support agent to find the problem.
6
portGrpsPortMirroringCheck: portGrpsMemberRemove: rc=<rc>
Member be removed from port group failure.
Send the log to your support agent to find the problem.
2011 Fujitsu Technology Solutions
©