Fujitsu Primergy BX900 System Message Manual page 56

Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
6
Unable to initialize dot1xTimerTask()
Unable to initialize dot1x timer task when initialize dot1x tasks
and data.
The dox1 mdoule is failed to init
6
dot1xCtlAdminModeDisable: could not set state to authorized,
intf <Interface Number>
Could not set state to authorized when disable administrative
mode setting for dot1x.
Cannot set the dot1x under the interface number, check the
interface number is available not.
6
Failure in applying config data for interface <Interface Number>
Failure in applying config data for interface.
The interface number is not available for the dot1x module.
6
dot1xIntfChangeCallback: Received an interface change
callback while not ready to receive it
Received an interface change callback while not ready to
receive it.
The interface number is not available for the dot1x module
6
dot1xIhProcessIntfChange L7_DOWN: failed sending terminate
cause, intf <Interface Number>
Failed sending terminate cause when port down.
Port down trap occurred.
6
dot1xIhProcessIntfChange L7_DISABLE: failed sending
terminate cause, intf <Interface Number>
Failed sending terminate cause when port disabled.
Port disable trap event
2011 Fujitsu Technology Solutions
©