Ip Subnet-Based Vlan - Fujitsu Primergy BX900 System Message Manual

4.2.5

IP Subnet-based VLAN

This section contains the IP Subnet-based VLAN module messages.
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error: IP Address requires an IP address in x.x.x.x form with
each octet(x) in the range 0-255.
The IP address of IP Subnet-based VLAN is not in form x.x.x.x
with numeric character 0-255.
Set IP address of IP Subnet-based VLAN in form x.x.x.x with
numeric character 0-255.
Error: Subnet Mask requires a subnet mask in x.x.x.x form.
The IP Subnet Mask of IP Subnet-based VLAN is not in form
x.x.x.x with numeric character 0-255.
Set IP Subnet Mask of IP Subnet-based VLAN in form x.x.x.x
with numeric character 0-255.
Error: Subnet mask must have contiguous ones and be no
longer than 30 bits.
The IP Subnet Mask of IP Subnet-based VLAN is not contiguous
ones and over 30 bits in each octet form x.x.x.x.
Set IP Subnet Mask of IP Subnet-based VLAN with contiguous
ones numeric character 0-255 and under 30 bits in each octet
form x.x.x.x.
Error: The IP address and subnet mask combination is not valid.
The IP address and Subnet Mask of IP Subnet-based VLAN is
not correct combination.
Set IP address without reserved IP and Subnet Mask with
contiguous ones and under 30 bits in each octet form x.x.x.x.
Error: VLAN format is invalid.
The value of IP Subnet-based VLAN ID is not numeric character.
Set IP Subnet-based VLAN ID with numeric character 1 to 4094.
Error: Value (<value>) is out of range for VLAN. The valid range
is 1 to 4094.
The value of IP Subnet-based VLAN ID is out of range.
Set IP Subnet-based VLAN ID with numeric character 1 to 4094.
2011 Fujitsu Technology Solutions
©