Access Control Lists - Fujitsu Primergy BX900 System Message Manual

3.4.6

Access Control Lists

This section contains IP ACL module messages.
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Incorrect input! Use 'no access-list <access-list-number>
[<rule_id>]'
User input incomplete command .
Use 'no access-list <access-list-number> [<rule_id>]'
Invalid ACL Name. Name string may include alphabetic,
numeric, dash, dot or underscore characters only. Name must
start with a letter and the size of the name string must be less
than or equal to 31 characters.
User input invalid format of IP ACL name.
Name string may include alphabetic, numeric, dash, dot or
underscore characters only. Name must start with a letter and
the size of the name string must be less than or equal to 31
characters.
Incorrect input! Use 'ip access-list rename <oldname>
<newname> '
User input incomplete command .
Use ' ip access-list rename <oldname> <newname>'
Access-list does not exist.
User attempt to rename a non-exist IP access-list.
Make sure the IP access-list is exist.
Access-list already exists.
User attempt to rename the IP access-list to a exist IP access-list
name.
To rename a non-exist IP access-list name.
Incorrect input! The Rule ID <ruleId> is already configured.
User attempt to create a rule with exist Rule ID.
Create rule with unused Rule ID.
Invalid start SrcL4Port number. <select SrcL4Port number
between 0 to 65535>
User attempt to create a rule with invalid SrcL4port number.
Create rule with SrcL4Port number between 0 to 65535.
2011 Fujitsu Technology Solutions
©