Dhcp - Fujitsu Primergy BX900 System Message Manual

3.1.12

DHCP

This section contains the DHCP Client.
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Incorrect input! Use 'ip dhcp client-identifier {text <text> | hex
<hex> }'
User input incomplete command .
Use 'ip dhcp client-identifier {text <text> | hex <hex> }'
Incorrect input! Use 'ip dhcp client-identifier hex
XX:XX:XX:XX:XX:XX'
User input invalid format of hex value.
Use 'ip dhcp client-identifier hex XX:XX:XX:XX:XX:XX'
Client identifier test must contain alphanumeric characters only.
User input invalid value for Client identifier.
Input text string. (Range: 1-32 characters)
Incorrect input! A text string. (Range: 1-32 characters)
User input over 32 characters for Client identifier.
Maximum 32 characters can be used for Client identifier.
Error! can't restart because the protocol of ipv6 dhcp6 client is
none.
User try to restart IPv6 DHCP client function, but the IPv6 DHCP
client function doesn't enable.
Enable IPv6 DHCP client function on the switch interface.
(Config)#interface vlan 1
(if-vlan 1)#ipv6 address protocol dhcp6
Error! can't restart because the protocol of oob dhcp6 client is
none.
User try to restart IPv6 DHCP client function, but the IPv6 DHCP
client function doesn't enable.
Enable IPv6 DHCP client function on the OOB interface.
(Config)#oob protocol dhcp6
Error! 'oob protocol dhcp6 restart'.
Duplicate user input ' oob protocol dhcp6 restart '.
Use 'oob protocol dhcp6 restart'.
2011 Fujitsu Technology Solutions
©