Fujitsu Primergy BX900 System Message Manual page 110
Blade server systems
ethernet connection blade module sb6 / sb11a / sb11 switch and ibp version
Hide thumbs
Also See for Primergy BX900:
- User manual (811 pages) ,
- Hardware reference manual (69 pages) ,
- Configuration manual (67 pages)
Table of Contents
Advertisement
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
0
User reset unit <unit-id>
Unit <unit-id> is reset by user.
The unit is reset from stack master.
6
Fail to send RESET command to unit <unit-id>.
Fail to send RESET command to unit <unit-id>.
Check the stacking cable is connected probably or not.
6
Failure propagating config info from non-management unit
Only management unit could propagate the Config info to stack
members.
Configuration file is only allowed to be distributed by stack
master.
6
Startup Config propagation compete
Startup configuration file propagation is successful
The configuration is propogated successfully.
4
Startup Config propagation failed
Startup configuration propagation failed
Checking the stacking cable if it is connected probably or not.
6
Running Config propagation failed
Running configuration propagation failed
Checking the stacking cable if it is connected probably or not.
6
Request configuration file download [2] to unit <unit-id> failed
rc=<reason>
Fail to send the request to unit <unit-id> for configuration file
downloading.
Checking the stacking cable if it is connected probably or not.
2011 Fujitsu Technology Solutions
©
Advertisement
Table of Contents
