Garp - Fujitsu Primergy BX900 System Message Manual

4.2.7

GARP

This section contains the GARP module messages.
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error: Please disable VTP at first.
The VTP Admin is not disabled before enable GVRP.
The VTP Admin should be disabled before GVRP enabled .
Error: Join Timer (centisecs) format is invalid.
The value of Join Timer (centisecs) is not numeric character.
Set Join Timer (centisecs) with numeric character 10 to 100.
Error: Value (0) is out of range for Join Timer (centisecs). The
valid range is 10 to 100.
The value of Join Timer (centisecs) is out of range.
Set Join Timer (centisecs) with numeric character 10 to 100.
Error: Leave Timer (centisecs) format is invalid.
The value of Leave Timer (centisecs) is not numeric character.
Set Leave Timer (centisecs) with numeric character 20 to 600.
Error: Value (<value>) is out of range for Leave Timer
(centisecs). The valid range is 20 to 600.
The value of Leave Timer (centisecs) is out of range.
Set Leave Timer (centisecs) with numeric character 20 to 600.
Error: Leave All Timer (centisecs) format is invalid.
The value of Leave All Timer (centisecs) is not numeric
character.
Set Leave All Timer (centisecs) with numeric character 200 to
6000.
Error: Value (<value>) is out of range for Leave All Timer
(centisecs). The valid range is 200 to 6000.
The value of Leave All Timer (centisecs) is out of range.
Set Leave All Timer (centisecs) with numeric character 200 to
6000.
2011 Fujitsu Technology Solutions
©