3.3.4
Service LAN
This section contains the Service LAN module messages.
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Incorrect input! Use 'svc-lan <svcLanName> <vlanID>
<uplinkSetName>'.
Incomplete command for this function.
Use complete command 'svc-lan <svcLanName> <vlanID>
<uplinkSetName>'.
Incorrect input! Use 'no svc-lan <svcLanName>'.
Incomplete command for this function.
Use complete command 'no svc-lan <svcLanName>'.
Incorrect input! Service LAN name can not more than 32
characters.
Incomplete command for this function.
Use complete command '
Incorrect input! Service LAN name must contain alphanumeric
characters only.
User input non alphanumeric characters for Service LAN name.
Use alphanumeric characters for the Service LAN name.
Incorrect input! Service LAN <svcLanName> has been used!!
User try to create a new Service LAN that has already exist in
the system.
Use the correct Service LAN name for this function.
Incorrect input! Service LAN <svcLanName> does not exist!
User input an Service LAN name, but the Service LAN doesn't
exist.
Use the correct Service LAN name for this function.
ERROR: Service LAN table is full.
User try to create a new Service LAN, but the Service LAN table
has reached the maximum.
The maximum Service LAN is 10, please check the Service LAN
setting.
2011 Fujitsu Technology Solutions
©