Fujitsu Primergy BX900 System Message Manual page 313

Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error:Error! Encryption Key must be 8 to 64 characters in length.
The value of Encryption Key is not 8 to 64 characters in length.
The value of Encryption Key must be 8 to 64 characters in
length.
Error: Authentication is required for this user since encryption is
enabled.
The value of authentication protocol is not specified for this user
while encryption protocol is used.
Specify the authentication protocol if the encryption protocol is
used.
Error: Failed to set User Name. You entered <username>.
Error: Failed to set Password. You entered .
Error: Failed to set User Name and Password.
The value of username includes special characters.
Use valid characters include all the alphanumeric characters as
well as the dash ('-') and underscore ('_') characters for user
name.
Error: The user name <username> has been used in SNMP!
This name has been used in SNMP user.
Use other name to create a new user account.
Error: Failed to set Password. Password must be at least
<Password Minimum Length> characters in length.
Password must be at least <Password Minimum Length>
characters in length.
The length of Password should greater than Password Minimum
Length.
Error: Value (<value>) is out of range for Password Minimum
Length. The valid range is 1 to 64.
The value of Password Minimum Length is out of range.
Make sure the value is in the range of 1 to 64.
Error: Privilege Level format is invalid.
The value of Privilege Level is non-numeric or blank.
Input a number for Privilege Level.
2011 Fujitsu Technology Solutions
©