Port-Group - Fujitsu Primergy BX900 System Message Manual

4.3.2

Port-Group

This section contains the Port-Group module messages.
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error: Failed to set <portGroupName>. Port Group name must
contain alphanumeric characters only, and can't be empty.
It is failed to create a Port Group while the name is not
alphanumeric characters.
Use alphanumeric characters for the Port Group name to create
a Port Group and the name can not be empty.
The Port Group name can not contain "default" string.
Error: Failed to delete <portGroupName>.
The Port Group name is invalid.
Refresh the WEB page, and select the Port Group name again.
Error: Failed to create Port Group. Port Group already exists.
The Port Group name already exists.
Create the Port Group with a name which is not used in the
system.
Error: Can't set Port Group member <interface_identifier>.
The interface is already used by other Port Group.
Remove the used interface from the Port Group.
Error: Failed to set <portGroupName>.
There are maximum 36 Port Groups already configured.
Reduce/Remove the unnecessary Port Group.
Error: Failed to set <uplinkSetName>.
The uplink-set does't existed to set for Port Group.
Refresh the WEB page and select a valid uplink-set for the Port
Group.
2011 Fujitsu Technology Solutions
©