4.7
End-Host-Mode
This section contains the pin-group messages.
Warning Message
Explanation
Recommended Action
Warning Message
Explanation
Recommended Action
Warning Message
Explanation
Recommended Action
Error: Failed to set %s. Pin Group name must contain
alphaNumeric characters only, and can't be empty.
Pin Group name is not valid. It must contain alphaNumeric
characters only, and can't be empty.
Use alphanumeric characters for pin-group name.
Error: Failed to create Pin Group. Pin Group already exists.
Create a pin-group with the group name is failed due to the
group name has been used.
Use another group name to create pin-group.
Error: Value (%d) is out of range for Repinning Timer, The valid
range is 10 to 60.
The valid timer vaule is range from 10 to 60 seconds.
Enter the valid value.
2011 Fujitsu Technology Solutions
©