Fujitsu Primergy BX900 System Message Manual page 11

SNTP
Spanning Tree
Storm Control
Stacking
TACACS
TFTP
Timer
VLAN
User Configuration
Web
Table 1-1 Facility code list
•
SEVERITY is a single-digit code from 0 to 7 that reflects the severity of the condition. The
lower the number, the more serious the situation. Table 1-2 lists the message severity
levels.
Severity Level Description
0 – emergency System is unusable.
1 – alert Immediate action required.
2 – critical Critical condition.
3 – error Error condition.
4 – warning Warning condition.
5 – notification Normal but significant condition.
6 – informationalInformational message only.
7 – debugging Message that appears during debugging only.
Table 1-2 Message Severity Levels
All syslog messages generated by a PRIMERGY BX900 switch other than the master switch
are displayed ending with (Switch-x) where Switch is the ip address of stack master and x is
the unit number of the stack member generating the message.
This example shows a partial switch system message on a switch other than a PRIMERGY
BX900 Connection Blade:
0 2000/04/01 09:41:21
1 2000/04/01 06:34:02
2 2000/04/01 01:57:25
3 2000/04/01 01:57:24
SNTP Timer Client System
802.1D/W/S Spanning Tree Control
Storm Control System
Stacking System
TACACS+ Security System
TFTP/FTP Upgrade System
System timer Clock
802.1Q GVRP/GARP/GMRP
User Login & Admin Control
Web UI System
Link Up: Unit: 1 Slot: 0 Port: 8
Link Down: Unit: 1 Slot: 0 Port: 8
Link Up: Unit: 1 Slot: 0 Port: 8
Link Down: Unit: 1 Slot: 0 Port: 8
2011 Fujitsu Technology Solutions
©