Fujitsu Primergy BX900 System Message Manual page 408

This section contains MAC ACL module messages.
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error: Failed to create MAC ACL. Invalid ACL Name. Name
string may include alphabetic, numeric, dash, dot or underscore
characters only. Name must start with a letter and the size of the
name string must be less than or equal to 31 characters.
User try to creat a MAC ACL, but it is failed.
To create MAC ACL Name within 31 characters include
alphabetic, numeric, dash, dot or underscore characters only
and start with a letter.
Error: Failed to create MAC ACL.
User try to configure a new MAC ACL, but the maximum 100
ACLs are already reached.
Reduce/Remove other unnecessary IP/MAC ACLs .
Error: Failed to create MAC ACL. ACL Name already exists
User try to create a MAC ACL, but the MAC ACL Name is
already used in the system.
Use other MAC ACL Name which is not used in the system to
create the new MAC ACL.
Error: Value (<value>) is out of range for Rule ID. The valid
range is 1 to 10.
The value of MAC ACL Rule ID is out of range.
The range fo MAC ACL Rule ID is 1 to 10.
Error: Failed to set Match Every.
User try to configure the MAC ACL Rule ID, but the selected
MAC ACL name does not exist.
Refresh the WEB page, and select the correct MAC ACL name
again.
Error: Failed to create MAC ACL. MAC ACL could not be
renamed.
User try to rename a MAC ACL, but the entry of MAC ACL name
is invalid or blank or the original name does not exist in the
system.
1. Rename the MAC ACL within 31 characters include
alphanumeric, dash, dot or underscore characters only and start
with a letter.
2. Refresh the WEB page, and select the correct MAC ACL
name again.
2011 Fujitsu Technology Solutions
©