Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error: Failed to create Port Channel Members : Speed is not
matched.
The interface can not be added to a port-channel if Speed is not
matched.
Set the interface to match the current operated speed of the
port-channel before adding to the port-channel.
Error: Failed to create Port Channel Members.
The interface used by other module can not be added to a
port-channel.
Remove the interface from other module before adding to the
port-channel.
Error: Failed to add all members to Port Channel. Member limit
exceeded.
The Port Channel members reach maximum members. The
maximum number of the port-channel member is 8.
Remove unnecessary members from port-channel first.
Error: Failed to create Port Channel Members : Type is not
matched.
The type of the interface is different from the configured
members of a port-channel. For example, a port-channel has a
10G type interface member, you can't add the 1G type interface
to it.
To add the same type interface to a port-channel.
Error: Failed to delete Port Channel.
The Port Channel interface is invalid.
Refresh the WEB page, and select the interface again.
Error: Failed to set Port Channel. Interface <interface_identifier>
is configured as memeber of a Port Group.
The interface configured as Port Group memeber can not set to
be port-channel memeber.
Remove the interface from Port Group before adding it to the
port-channel.
2011 Fujitsu Technology Solutions
©