Sntp - Fujitsu Primergy BX900 System Message Manual
Blade server systems
ethernet connection blade module sb6 / sb11a / sb11 switch and ibp version
Hide thumbs
Also See for Primergy BX900:
- User manual (811 pages) ,
- Hardware reference manual (69 pages) ,
- Configuration manual (67 pages)
Table of Contents
Advertisement
4.1.7
SNTP
This section contains the Global Config messages.
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error: Value (<value>) is out of range for Port. The valid range is
1 to 65535.
The value of Port is a non-numeric value or is out of range.
Use numeric value for Port and make sure the value is in the
range of 1 to 65535.
Error: Value (<value>) is out of range for Unicast Poll Interval.
The range is 6 to 10.
The value of Unicast Poll Interval is a non-numeric value or is out
of range.
Use numeric value for Unicast Poll Interval and make sure the
value is in the range of 6 to 10.
Error: Value (<value>) is out of range for Broadcast Poll Interval.
The range is 6 to 10.
The value of Broadcast Poll Interval is a non-numeric value or is
out of range.
Use numeric value for Broadcast Poll Interval and make sure the
value is in the range of 6 to 10.
Error: Value (<value>) is out of range for Unicast Poll Timeout.
The range is 1 to 30.
The value of Unicast Poll Timeout is a non-numeric value or is
out of range.
Use numeric value for the Unicast Poll Timeout and make sure
the value is in the range of 1 to 30.
Error: Value (<value>) is out of range for Unicast Poll Retry. The
range is 0 to 10.
The value of Unicast Poll Retry is a non-numeric value or is out
of range.
Use numeric value for the Unicast Poll Retry and make sure the
value is in the range of 0 to 10.
2011 Fujitsu Technology Solutions
©
Advertisement
Table of Contents
