Time And/Or Date Are Incorrect; System Fails To Boot; Error Messages On The Monitor - Fujitsu PRIMERGY RX100 S3 Operating Manual

Time and/or Date are Incorrect

Mouse controller disabled
The mouse controller on the system board must be enabled if you use the
supplied mouse.
Ê Check in the BIOS Setup whether the mouse controller is Enabled.
6.7 Time and/or Date are Incorrect
Ê Set the time and/or date in the operating system or in the BIOS Setup.
I
If the time and date are repeatedly wrong when you switch on your
server, you must change the lithium battery. Contact our Service group.
6.8

System Fails to Boot

The system will not boot after installing a new hard disk drive.
Ê Reboot the System with the ServerStart CD or with a boot CD and reconfigure
the server (see
6.9

Error Messages on the Monitor

The meanings of the error messages are explained in the manual for BIOS Setup
and in the documentation for the relevant components and programs on the
PRIMERGY ServerBooks CD.
54
section "Configuring the Server" on page
Problem Solutions and Tips
46).
U41615-J-Z156-1-76