Fujitsu Primergy BX900 System Message Manual page 232

Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
ERROR: Uplink Set <uplinkSetName> has been used by other
module.
User input an Uplink set name to associate with a Port Group,
but the Uplink set has used for other groups.
Use another Uplink set for this Port Group.
ERROR: Port Group name <portGroupName> is not allowed to
delete.
User try to delete a Port Group that is created by system.
The system created Port Group could not be deleted, please use
the correct Port Group name for this function.
Incorrect input! Use 'show port-group [<portGroupName>]'.
Incomplete command for this function.
Use complete command 'show port-group [<portGroupName>]'.
Incorrect input! Use 'port-group <portGroupName>'.
Incomplete command for this function.
Use complete command 'port-group <portGroupName>'.
ERROR: Could not set external port <intIfNum> on port group.
User try to add an external port to the Port Group.
External port doesn't support Port Group function. External port
should use Uplink set.
ERROR: This function is not allowed on port-channel members.
User try to add a port-channel member port to a Port Group.
The interface should move out from the port-channel and then
add to the Port Group.
ERROR: Interface <intIfNum> is already member of a port
group.
User try to add a port to the Port Group, but the port has joined
this Port Group already.
Use the correct Port Group for this function.
2011 Fujitsu Technology Solutions
©